The Wellness One Lifestyle range is a group of dedicated outdoor-sauna models. This guide explains the one range-wide construction fact confirmed by Wellness One and provides a disciplined process for comparing the available catalogue identities without publishing historical dimensions, capacities, prices, heater assignments, glazing, interior materials, lead times or guarantees as current facts.
The confirmed construction fact
Wellness One confirms that Lifestyle and Connect models use 200 mm-thick walls, ceiling and floor, each incorporating 100 mm PUR insulation. This statement is limited to those two ranges. It does not apply to Therma, spa pools, swim spas or cold-water products. It also does not prove a particular heat-up time, maximum temperature, running cost, energy saving, service life or superiority over another product.
For any Lifestyle proposal, the rest of the build should be established through a revision-controlled drawing and written product schedule. The schedule should identify the selected model, overall dimensions, internal layout, doors, glazing, exterior and interior materials, heater, controls, ventilation, lighting, included fittings and finishes. Where website copy, a brochure and a quotation differ, the current accepted quotation and referenced specification should control the order.
Understanding the model names
The current catalogue identifies Lifestyle models including Lifestyle 2, Lifestyle 3, Lifestyle 4, Lifestyle 6 and Lifestyle 10. Those names are useful catalogue identifiers, but they should not be treated as verified statements of user capacity, floor area or finished dimensions. Ask for the current drawing for the exact model and revision being quoted.
The right model depends on how the sauna will actually be used. Record the number of regular users, preferred sitting or lying positions, accessibility needs, whether users will enter together or in smaller groups, and the space required around the benches and heater. Also consider who may use the sauna in future. A layout that suits occasional individual use may not suit a household that expects several people to use it at once.
Garden footprint, access and orientation
Compare the proposed drawing with a measured site plan. The plan should show the building footprint, doors, glazing, service points, boundaries, nearby structures, drainage and the route from the public highway. Check gate widths, turns, steps, slopes, overhead restrictions and any need for lifting equipment. Delivery access should be confirmed before manufacturing or delivery commitments are treated as final.
The base must be designed for the selected building and site conditions. It needs to be stable, level and capable of supporting the confirmed loads, while managing water away from the structure. A general range guide cannot prescribe one slab, foundation depth or tolerance for every property. The responsible designer or contractor should work from the current model drawing and local ground conditions.
Planning rules also depend on the property and nation. The Planning Portal describes the general permitted-development framework for outbuildings in England, but location, height, boundaries, listed status, designated land and removed rights can affect the result [1]. The owner remains responsible for obtaining the relevant confirmation before work starts.
Heater and electrical specification
The heater must be selected from the exact heated-room volume and construction, then checked against the current manufacturer manual. The quotation should identify the manufacturer, model, output, controls, permitted room-volume range, stones, safety distances and ventilation requirements. Do not assume a brand or output from a model name or an image.
A competent electrician must assess the property supply and design the circuit for the selected equipment. The assessment includes protective devices, isolation, cable route, earthing, inspection, testing and certification. Approved Document P provides the electrical-safety building-regulation framework for dwellings in England [2]; the applicable rules and notification route must be checked for the installation location.
Delivery, installation and handover
Wellness One has confirmed an outdoor-sauna operations sequence that can include UK manufacture, delivery in sections, unloading, positioning, structure build, electrical cabling, exterior cladding, windows and doors, interior fit-out, electrical connection and commissioning. Exterior and interior timbers may be pre-cut, electrical boxes may be pre-built, and glass may travel separately. These operational facts do not establish which tasks, materials or services are included in every Lifestyle quotation.
Ask the quotation to allocate responsibility for the base, access, unloading, lifting, service trenches, electrical work, drainage, installation, commissioning, waste and making good. At handover, obtain the final specification, equipment manuals, relevant certificates, care information, guarantee documents and aftercare contacts.
Lifestyle quotation checklist
- Current dimensioned drawing with revision and date.
- Exact exterior, interior, glazing and finish schedule.
- Heater model, controls, UK manual and electrical requirements.
- Base, service, access and drainage requirements.
- Delivery, unloading, installation and commissioning responsibilities.
- VAT-inclusive price, exclusions, deposit and payment milestones.
- Approved terms, cancellation information and signed guarantee terms.
- Handover documents, manuals, certificates and maintenance guidance.
This written-document approach lets buyers compare a Lifestyle proposal on verifiable scope rather than on historical figures or broad marketing statements. It also gives site professionals the information needed to plan before production and delivery.
Frequently asked questions
What is confirmed about Lifestyle construction?
Wellness One confirms that Lifestyle and Connect models use 200 mm-thick walls, ceiling and floor, each incorporating 100 mm PUR insulation. The statement is limited to construction and does not guarantee a temperature, heat-up time, running cost or market comparison.
How should I choose a Lifestyle model?
Choose by reviewing the current dimensioned drawing, intended users, bench and door layout, garden footprint, delivery access and future needs. Do not infer capacity or dimensions from the model name; confirm them in the current written specification.
Which documents should accompany a Lifestyle quotation?
Request the current drawing and product schedule, heater and electrical schedule, materials and glazing specification, delivery and installation responsibilities, VAT-inclusive price, guarantee terms and the approved terms applying to the order.
References
| Marker | Source |
|---|---|
| [1] | https://www.planningportal.co.uk/permission/common-projects/outbuildings/planning-permission |
| [2] | https://www.gov.uk/government/publications/electrical-safety-approved-document-p |